`
GM3T.com

All New G1T Genie Intellicode Replace Remote Control
Is Compatible With All Genie Intellicode Garage Door Openers Made

The G1T Will Replace All Of The Following Discontinued Remote Controls
GIT-1, GIT-1BL, G2T-1, G2T-1BL, GICT390-1, GICT390-1BL, GIFT390-1
GIC1, GIC90-1, GICTD-1, GICTD-1BL, GIFTD-1, GIFTD-1BL
ACSGT Type 1, TBSTG Type 1, ACSCTG Type 1

The G1T Replaces All One Button Intellicode Remote Controls Made By Genie.

$29.95

All New GM3T Genie Intellicode Replace Remote Control
Is Compatible With All Genie Intellicode Garage Door Openers Made

The GM3T Will Replace All Of The Following Discontinued Remote Controls
GIT-1, GIT-1BL, GIT-2, GIT-2BL, GIT-3, GIT-3BL, G2T-1, G2T-1BL, G2T-2, G2T-2BL, G2T-3, G2T-3BL
ACSGT Type 1, ACSGT Type 2, ACSGT Type 3, TBSTG Type 1, TBSTG Type 2, TBSTG Type 3
GIC1, GIC2, GIC3, GIC90-1, GIC90-2, GIC90-3, GIC90-4
ACSCTG Type 1, ACSCTG Type 2, ACSCTG Type 3, ACSCTG Type 4
GICTD-1, GICTD-1BL, GICTD-3, GICTD-3BL, GIFTD-1, GIFTD-1BL

Use This Remote As A One, Two Or Three Button Remote By Programing 1, 2 Or 3 Buttons As Needed.

GM3T Genie Remote

The G3T Genie Intellicode Replace Remote Control
Is Compatible With The Following Genie Intellicode Garage Door Openers Made Today

SILENTMAX 1000 Belt Drive 3042, 3042-TK3, 3042-TKV, 3042-CCRV
SILENTMAX 1200 Belt Drive 4042, 4042-TKC
IntelliG-1000 Belt Drive 3024, 3024H-TKC - IntelliG-1200 Belt Drive 4024, 4024HC
ChainMax 1000 Chain Drive 3022 - ChainMax 1200 Chain Drive 4022
IntelliG 1000 Chain Drive 3024, 3024H - IntelliG-1200 Chain Drive 4024, 4024H
PowerMax 1500 Screw Drive 4062 - PowerMAX 1200 Screw Drive 3062
TriloG 1200 Screw Drive 3064, 3064H - TriloG 1500 Screw Drive 4064, 4064H
PowerLift 900 Screw Drive 2562 - GPower 900 Screw Drive 2564, 2564H

This Remote Is A Direct Replacement If Your Remote Looks Like The One Below.

G3T-BX, 37218R , 37218R.S
Intellicode GK-BX Keypad Replacement Covers
Colors Are Not Exactly the Same As Shown!

GK-BX Genie Intellicode Replacement Wireless Keypad
Compatible With All Genie Intellicode Garage Door Openers Made

The GK-BX Wireless Keypad Will Replace All Of The Following Models
GWKIC-BL, GK-R, GWKP-BL, GWKPD-BL And All Intellicode Wireless Keypads Made By Genie
This Is The Only Style Keypad Made By Genie For Intellicode Openers

GM3T Genie Remote

All New GM3T Genie Universal Replace Remote
Is Compatible With All Intellicode And 9 - 12 Switch 390MHz Genie Openers

The GM3T Will Replace All Of The Following Discontinued Remote Controls
GT912, GT912-BL, GT90-1, GT90-1BL, GT90-2, GT90-2BL, GT90-3, GT90-3BL
AT90, AT90-1BL, ALT90-1, ALT90-1BL, AT290, AT290-2BL, AT95, AT95-3BL, CT90-1, CT90-1BL
GPT90-1, GPT90-1BL, GPT90-2, GPT90-2BL, GPT90-3, GPT90-3BL, LD12, LD12-1BL, LDT90-1, LDT90-1BL
PMT90-1, PMT90-1BL, MAT90-1, MAT90-1BL, B8QGT50, B8QGT100

Use This Remote As A One, Two Or Three Button Remote By Programing 1, 2 Or 3 Buttons As Needed.

387LM Genie Compatible Keypad
  • Use The G1T Remote If You Have Any Of The One Button Model Numbers Listed Above
  • G1T Remote Replaces All One Button Intellicode Remotes
  • Genie Made Product For Intellicode Openers Only
  • Use As A One Button Genie Visor Or Key Ring Remote
  • Replaces All Intellicode Series I, Series ll And Series III Remotes
  • When Your Old Remote Says Intellicode On It The G1T Is the Right Remote To Order
  • Dimensions: 2-3/4" L x 1-1/4" W x 1/2"  H
  • Homelink Car Vehicle Compatible With Intellicode Openers
  • Battery And Visor Clip Included, Order Extra Items Below
  • Genie G1T Programing Instructions Included With Your Order
  • Use The GM3T Remote If You Have Any Of The 2 Or 3 Button Model Numbers Listed Above
  • GM3T Remote Replaces All Three Button Intellicode Remotes
  • This Is A Genie Made Product For Intellicode Openers Only
  • Use As A One, Two Or Three Button Genie Visor Remote
  • Replaces All Intellicode Series I, Series ll And Series III Remotes
  • When Your Old Remote Says Intellicode On It The G1T Is the Right Remote To Order
  • Dimensions: 3-3/8" L x 1-15/16" W x 1/2" H
  • Homelink Car Vehicle Compatible With Intellicode Openers
  • Battery And Visor Clip Included, Order Extra Items Below
  • Genie GM3T Programing Instructions Included With Your Order
$34.95
  • Use The G3T Remote If You Have Any Of The Garage Door Openers Listed Above
  • G3T Remote Replaces All Three Button Intellicode Remotes
  • This Is A Genie Made Product For Intellicode Openers Only
  • Use As A One, Two Or Three Button Genie Visor Remote
  • Replaces All Intellicode Series I, Series ll And Series III Remotes
  • When Your Old Remote Says Intellicode On It The G1T Is the Right Remote To Order
  • Dimensions: 2-1/2" L  x 1-3/4" W  x 1/2" H
  • Homelink Car Vehicle Compatible With Intellicode Openers
  • Battery Included, Order Extra Items Below
  • Genie G3T Programing Instructions Included With Your Order
$29.95
  • This Is The Only Genie Intellicode Wireless Keyless Entry Keypad Made For Intellicode Openers
  • All Older Intellicode Keypads Are Discontinued And Replaced By This One
  • This Is A Genie Made Product For Intellicode Garage Door Openers Only
  • When Your Receiver And Remote Has 9 Or 12 Two Position Switches Use The 387LM Below.
  • 10 Number Button Keypad With Flip-up Cover
  • Can Be Used On Three Genie Intellicode Openers
  • Lighted Keypad Buttons, With Rolling-code technology
  • Optional keypad cover are listed below
  • Batteries And Mounting Screws Are Included
  • Genie GK-BX Programing Instructions Are Included With Your Order
$38.95
White
Flip Cover Only
Gray
Flip Cover Only
Tan
Flip Cover Only
Almond
Flip Cover Only
$16.95
$16.95
$16.95
$16.95
White
GKCW-BX
Gray
GKCG-BX
Tan
GKCT-BX
Almond
GKCA-BX
  • This 3 Button Remote Can Be Used With Genie 9 Or 12 Switch Openers, 390MHz
  • Use to Replace Any Of The Above Remote Models
  • This Is A Genie Made Product For Genie Garage Door Openers Only
  • Use As A One, Two Or Three Button Genie Visor Remote
  • Works With All Genie Gated Community Receivers, 390MHz
  • Dimensions: 3-3/8" L x 1-15/16" W x 1/2" H
  • This Remote Will Not Work With 315MHz Canadian Models With 9 Or 12 Switch Remote Controls
  • Battery And Visor Clip Included
  • Genie Programing Instructions Are Included With Your Order
$34.95

387LM Universal Wireless Keyless Entry Keypad
Is Compatible With All 9 Or 12 Dip Switch 390MHz Genie Garage Door Openers

The 387LM Wireless Keypad Will Replace All Of The Following Models GWK-BL, GWK-12, GPWK-BL, GPWK-12
This Is The Only Keypad Available For 9 Or 12 Switch Genie Garage Door Openers

  • This Keypad Can Be Used With Genie 9 Or 12 Switch Openers, 390MHz
  • Use to Replace Any Of The Above Keypads Models
  • This Is A Genie Compatible Product Used With Genie Garage Door Openers
  • The Keypad Is Installed On The Outside Frame Of Your Garage Door Opening
  • Allows Entry Using Your Own Personal Identification Number
  • This Is A Universal Keypad That Can Be Used On Different Manufacturer's Openers
  • This Keypad Will Operate One Door, One Will Be Needed For Each Garage Door Opener
  • 9v Battery And Mounting Screws Included
  • 387LM Programing Instructions Are Included With Your Order
$39.95
Genie®,  Intellicode® and GenieMaster Are Register Trade Marks Of The Overhead Door Company. All Trade Mark Rights Are Reserved.
Our Main Office Hours Are Monday - Friday From 8:00am to 5:00pm
Need Help Ordering? Call 1-888-341-3003
Questions? Email Us For A Faster Response At!
info@GenieRemotesOnline.com
Monday - Friday Orders
Ship In 24 Hours